Please contact us by  or Tel. 0800 310 1416

Home | Up | Contents

Home | Up | Surface Preparation and Cleaning | Spares and Training

Surface Preparation and Cleaning
After Cleaning...
Spares and Training

Once steelwork has been blast cleaned, it starts to rust rapidly; with our damp blast sand jet this happens in a matter of minutes.

Primers and Topcoats can be applied to protect the steel from corrosion.

Zinga is a one-component cold applied galvanic zinc coating. Its unique formula provides environmentally safe cathodic protection to steel comparable with hot dip galvanising, with the added advantage that it can be applied, on site, like a paint.

We also use other products, from moisture curing urethane products from MCU coatings for example, topcoats from Firwood.

A set of large fenceposts prepared and galvanised using Zinga on site in 2005.

Cast Iron Pillars - in a converted block of flats in Sheffield 2008, Primed with Zinga, sealed and topcoated with Intumescent (fire protection) paint.

A complex web of metal in an ex Aircraft Hangar - cleaned and primed with MCU Aluprime Spring 2009. (easier to see in the photo the sections that haven't been painted. To add to the complications, due to other site works - the painting had to be done at night!

Playground equipment painted with Firwood's primers and topcoats. December 2007

[ Home ] [ Up ]

Send mail to webmaster@surfprep.co.uk (webmaster [at] surfprep [dot] co [dot] uk) with questions or comments about this web site.
Copyright © 2004, 2010 Greenleaf Contractors Ltd

With thanks to John Sinclair Willis for Original (Ashrose Group) Website Design -pcuk 

Last modified: 04/30/10